Unsetting the system
Canceling the Exit procedure
If you key in your code, and then immediately decide not to set the system, you can cancel the exit
procedure by one of the following ways:
During the first 5 seconds of the exit period and with the red FUNCTION indicator still on, just press the
ERROR key twice to cancel the exit procedure.
*** Goodbye ***
MANAGER
The inside sounder will stop; the keypad will display the ‘Goodbye’ message for a few seconds and then
display the time and date. The green DAY indicator will remain on.
After the first 5 seconds of exit period you must key in your code to cancel the exit procedure.
Enter your code?
The inside sounder will stop, the keypad will display the ‘System Unset by’ message for a few seconds and
display the time and date. The green DAY indicator will remain on.
System Unset by MANAGER
Unsetting the System
Entering the premises by the designated entry route will cause the entry period to start. The inside sounder
will emit a slow beep-beep-beep sound. You must now key in your code and press the ENTER key at the
nearest available keypad to cancel the entry period. The length of time that you have is called the entry time;
check your SIS to see how long this is. During the last 10 seconds of the entry period the entry tone will
raise in pitch to inform you of the urgency to enter your code.
If you enter your code within the entry period the inside sounder will stop, the keypad will display the
‘System Unset’ message for few seconds and then display the time and date.
System Unset by MANAGER
The green DAY indicator will light. The system is now unset.