4
Step 5
Attach the “Latch” To the rear bow assy. as shown below using 5/16”x3/4” carriage bolts(a) with flat washers(b) and nylock nuts(d).
Step 6
Next install the “Axles” and “Rollers” at the end of both front and rear crossbow. The “Axle” just slides in and the “Rollers” slide over the
ends of the “Axle” as shown below, make sure insert the nylon washers(n) between the wheels and crossbow.
6
Step 7
Next install the “Ladder Pan Assy.” Align cutouts in “Ladder Pan Assy.” with the “Rollers” and guide the arms onto the “Torque Tube Pivot
Assy.” As you lower the assembly onto the rollers. Insert 5/16”x 2” bolts with flat washer and nylock nuts through arms and “Torque Tube
Assy.” Make sure the “Rear Ladder Pan Assy.” is on the rear crossbow.
(a)
(b)
(d)
(n)
(n)
