2
40963/40943 Installation Instructions
Step 1
Bolt “Dampener mounting bracket” underneath the crossbow (both front and rear) as shown below using 3/8”x3/4 Bolts with flat and lock
washers.
Step 2
Bolt “Torque tube pivot Assy.” underneath the crossbow (both front and rear) as shown below using 3/8”x3/4 Bolts with flat and lock
washers. Be sure to have the 3 hole flanges facing each other (rear bow shown). You may need to detach the feet and lift the crossbow
slightly to get into place.
Step 3
Attach the “Torque Tube” between the flanged plates on the “Torque Tube pivot Assy.” Using ¼”x7/8” bolts as shown below. Be sure the
“Torque Tube pivot Assy.” are lined up prior to bolting them together. You can now re‐attach the feet.
(j)
(k) (l)
