Karel MS38s, Programming Manual

Page: 26 / 78

Karel MS38s Programming Guide
Edition 3.1
22
If it is not a fax call, it is diverted to the operator and T is
released if the operator does not answer the call for 5 ringing
periods.
4. Parameter S:
a) Unless an EVM-DE card is installed on the system, it is not allowed to
enter parameter S.
b) When S = 0, EVM38 answers the external parties calling the system in
Night Mode even when Auto Attendant is not activated by the operator.
c) Even when S = 0, EVM38 does not answer the external parties calling
the system through non-Auto Attendant or non-DISA lines in
Night
Mode if Fax Router Mode 1 or Mode 2 is activated by the parameter R.
d) When S = 1, Auto Attendant lines function as non-Auto Attendant lines
in Night Mode .
5. Line Ringing Assignment & Parallel Operators :
a) If the
Day
or
Night Mode
ringing extensions are different from the
Parallel Operators , the incoming calls through T ring only on these
ringing extensions, not on the Parallel Operators .
b) If the
Day
or
Night Mode
ringing extensions are one of the
Parallel
Operators , the incoming calls through T ring on all Parallel Operators
except for the operator.
III.3. FOLLOW ME BUSY LINE (8050)
Allows defining groups of lines, so that the extensions who try to access a busy line
by
Selective Line Access are connected to the next line in the same group. The
program can be entered both in
Day
and
Night Modes
so as to set different
Day
and
Night Mode groups of lines.
•
A
CTIVATE
•
C
ANCEL
8050 T
1
T
2
8050 T
1
T
1
•
P
ARAMETERS
T
1
: The first line number.
T
2
: The second line number.
•
N
OTES
1. Entering the same code “ 8050 ” more than once, as many lines as desired
can be included in a line group. However, these lines must form a chain;
that is, T
1
of an entry of the program must be equal to the T
2
of the
previously entered program.
2. To delete a line group, the program must be entered for each line as
“8050 T
1
T
1
”.