Karel MS38s, Programming Manual

Page: 21 / 78

Karel MS38s Programming Guide
Edition 3.1
17
II.16. HOT LINE (804)
Allows defining a Hot Line for an extension so that the extension can do one of the
following just upon lifting handset:
1. Call another extension.
2. Access any idle line.
3. Access a specific line.
4. Call the number stored in the 97
th
or 98
th
or 99
th
common pool, which may be
used for emergency calls.
•
A
CTIVATE
•
C
ANCEL
804 E
1
P Q 804 E
1
E
1
•
P
ARAMETERS
E
1
: Extension number.
P = E
2
: E
1
calls extension E
2
.
= 09 : E
1
accesses any idle line.
= 07 T : E
1
accesses T, where T is line number.
= 03 : E
1
immediately calls the number stored in common pool 97.
= 04 : E
1
immediately calls the number stored in common pool 98.
= 05 : E
1
immediately calls the number stored in common pool 99.
Q = 0 : Connection between E
1
and P is established immediately.
= 1 : Connection between E
1
and P is established 4 seconds after
E
1
lifts handset. E
1
can activate any other facility as well within
these 4 seconds.
•
B
Y
D
EFAULT
804 E
1
E
1
is active for all extensions.
•
N
OTES
1. It is not allowed to enter parameter Q if P = 03, 04 or 05.
2. A Hot Line cannot be assigned to the operator.
3. If P = 03, 04, 05, or Q = 0; the extension is prohibited from using his “ ” &
“#” keys,
Hook Switch
and
Programmable Facility Keys,
even after
Hot Line
is canceled.
4. If P = 03, 04, 05:
When Hot Line is activated, the External Call Authority Level of the
extension is automatically set to “
3
”.
-
When
Hot Line
is cancelled, the
External Call Authority Level
of the
extension is automatically set to “
0
”.
- Even if all lines are occupied when the extension lifts the handset, the
system releases one of the lines and assigns this line to the extension.
-
Even if the telephone is locked when the extension lifts the handset, the
extension accesses a line and starts calling the common pool number.
There is no need to dial the password as the telephone automatically
becomes unlocked.