Karel MS38s, Programming Manual

Page: 14 / 78

Karel MS38s Programming Guide
Edition 3.1
10
II.6. ACCESS GROUP LINE MATCHING (802)
Allows allocating lines to the access groups defined by Access Group program.
802 T P (P P P ,,,,,)
•
P
ARAMETERS
T : Line number.
P = 00,…,06 : Access group numbers (defined by
Access Group
program) to which T is to be allocated.
P = 07 : T is unavailable for all extensions.
•
B
Y
D
EFAULT
802 T 00 is active for all lines.
•
N
OTES
1.
P = 00,…,06:
After each entry of an access group number, instead of giving internal dial
tone, the system allows entering new access group numbers. Hence, by a
single entry of this program, a single line can be allocated to at most 7
access groups at a time. If it is desired to allocate T to less than 7 access
groups, you should hang up after entering the last access group number.
2. If P is set to 07, the system gives internal dial tone and does not allow
entering any more access group numbers.
3. The following example is given to clarify the entry of the program.
To:
- Mark line 04 as unavailable,
- Assign line 01 to the access groups 01, 02 and 03,
- Assign lines 02 and 03 to the access group 02,
The codes to be dialed are:
- 802 04 07,
- 802 01 01 02 03 and hang up,
- 802 02 02 and hang up,
- 802 03 02 and hang up.