Kardia Standard v.103, Installation Manual

Page: 16 / 52

15 /
Installation of central vacuum cleaner
Follow the instructions for pipe installation in the house, see
"Central vacuum cleaner" under Technical Information on page 41.
Flexible hoses are supplied with clamps on top of the Kardia unit.
These should connect the PVC pipe network to the vacuum.
The 24-volt cable is connected to the vacuum cleaner and located
on top of the Kardia unit. This cable should be connected to the wall
inlets. The illustration below shows how to install it correctly.
Installation of sliding door
There must be 35mm of clearance above the top rail of the sliding
door to allow for installation and removal.
This is indicated by a line above the rail marked “Gypsum board
until here ↓” . Do not install anything below this line.
Install the sliding doors as the last step during construction, before
the house is transferred to the customer.
See following instruction how to install the door: