Kardia Standard v.103, Installation Manual

Page: 10 / 52

9 /
3. The packaging can be removed
before installation, but it is
recommended not to remove
the inner package layer until
necessary to avoid damage
during hoisting and
construction activity.
4. The sliding doors are attached to
the cabinet inside the outer
layer of packaging. Set these
aside in a safe place for later
installation.
5. The cabinet is lifted by using the
four eye bolts located at the top
of the unit and must be hoisted
with approved lifting equipment.
The cabinet weighs 470kg.
6. Cut away all packaging from the
underside of the cabinet before
lowering the cabinet in place.
Lower the cabinet into place on
the rubber shims. While
lowering, lead the main water
pipe into the base plate cone.
Leave packaging covering the
top and sides until the house is
sealed to protect the cabinet
during the construction period.
7. Attach the steel frame to the
house’s framing with 2-3 screws
(recommend 100x5mm wood
screws). This is to avoid that the
unit is moved during the building process which can result in
the drainage pipe disconnecting from the drain.