Kärcher SV 7, Operating Instructions Manual

Page: 22 / 412

– 8

Do not suck in burning or
glowing objects such as ciga-
rette buds, ash or other burn-
ing or glowing materials.

Should the appliance fall
down, it must be check by an
authorised after sales service
as internal disturbances
could be present, which con-
strain the safety of the prod-
uct.
CAUTION

Make sure that the power ca-
ble or extension cables are
not damaged by running
over, pinching, dragging or
similar. Protect the power ca-
ble from heat, oil, and sharp
edges.

Always switch off the ma-
chine and remove the plug
while filling the machine with
water.

Never fill solvents, solvent-
containing liquids or undiluted
acids (e.g. detergents, ben-
zene, paint thinner, and ace-
tone) into the water reservoir
as these substances affect
the materials used on the ap-
pliance.

The appliance must provide
of a stable ground.

Do not place the machine on
heat-sensitive surfaces.

Do not place the machine in
the vicinity of swtich-on
stoves, electrical ovens or
other sources of heat.

Press the switches lightly and
avoid using sharp objects
such as pins, pens/pencils
and similar objects.

Use and store the unit only in
accordance with the specifi-
cations in the description and/
or figure.

The steam switch must not be
locked during the operation.

Please switch off the machine
first using the main switch be-
fore disconnecting the ma-
chine from the mains.

To separate the machine
from the mains, pull the plug
and not the power cord.

Never wind the main cable
around the machine, definite-
ly not till the machine is still
hot.

Protect the appliance from
rain. Do not store outside.
Safety devices serve for the protection of
the user and must not be put out of opera-
tion or bypassed with respect to their func-
tion.
 The handle on the steam suction hose
is equipped with a release button, which
prevents accidental steam release.
 In the event that the steam suction hose
is shortly unattended during operation,
it is recommended to activate the re-
lease button (push the stop button).
 In order to trigger the steam release
again, deactivate the release button
(push the stop button again).
Safety installations
Release button
22 EN