Kärcher SC 1.030, Manual

Page: 20 / 262

– 12
Often, failures have simple causes and you can
do the troubleshooting yourself using the follow-
ing overview. If you are in doubt or if the failure is
not listed here please contact the authorized
customer service.

Danger
Always disconnect the mains plug and allow the
steam cleaner to cool down before performing
any maintenance work.
Repair works may only be performed by the au-
thorized customer service.

Descale the steam boiler.

Turn off the appliance.

See „Refilling Water“ Page 8.
Steam switch is secured with the lock / child-
proof lock.

Move the selector switch for the steam vol-
ume to the front.
During longer breaks from ironing, the steam in
the steam line can condense.

Direct the first burst of steam at a separate
piece of cloth.

Set the thermostat to level •••.

Rinse or decalcify the boiler of the steam
cleaner.

Press the steam gun until less water is emit-
ted.

Descale the steam boiler.
Subject to technical modifications!
Troubleshooting
Long heating-up time
Steam boiler is decalcified
No steam
No water in the steam boiler.
Steam lever cannot be pressed anymore
After breaks during ironing, water drops will
come out of the steam pressure iron.
Steam iron "spits out" water!
High water output
Steam chamber too full
Steam boiler is decalcified
Technical specifications
Electrical connection
Voltage 220-240
1~50/60 V
Hz
Protection class IP X4
Protective class I
Performance data
Heating output 1500 W
Heating output steam iron 700 W
Operating pressure max. 0,32 MPa
Heating time 8 Minutes
Steam volume
Continuous steaming
40 g/min
Steam push max. 100 g/min
Dimensions
Boiler capacity 1,0 l
Length 380 mm
Width 254 mm
Height 260 mm
Weight (without accessories) 2,9 kg
20 EN