Kärcher SC 1.030, Manual, Page: 18 / 262

– 10
Suited for all washable walls and floor coverings,
e.g. stone floors, tiles and PVC floors. Work
slowly on very dirty surfaces to allow the steam
to act on the dirt for a longer period of time.
Note: Detergent residue or care emulsions that
are still present on the surfaces to be cleaned,
can lead to smears when steam cleaned. How-
ever, these will disappear with repeated cleaning
procedures.

Illustration
Attach the floor cloth to the floor nozzle.
1 Fold the floor cloth the long way and place
the floor nozzle on top of it.
2 Open holding clamps.
3 Place the cloth ends into the openings.
4 Close the holding clamps.
Caution
Do not insert fingers between the clamps.

Illustration
During work breaks, hook the floor nozzle
into the parking holder.

Danger

The steam pressure iron must not be used if
it has been dropped, shows visible signs of
damage or if it leaks.

The steam pressure iron is hot and so is
the steam jet!
Point out to other people the
possible risk of being scalded or burnt. Nev-
er direct the steam jet at people or animals
(risk of scalding). Do not touch any electrical
leads or combustible objects with the hot
steam pressure iron.
몇
Warning

The steam pressure iron and its connecting
cable must be kept out of reach of children
under the age of 8 during the heating and
cooling down periods.

The steam pressure iron must be used and
placed on a stabile surface.
Note: We recommend using the Kärcher ironing
table with active steam extraction (2.884-933.0).
This ironing table has been designed to match
your new steam cleaner. It facilitates and, thus,
accelerates the ironing process substantially. In
any case, you should use an ironing table which
is covered with a mesh-type underlay allowing
the steam to pass through
.

Tightly insert the steam plug of the iron into
the appliance connector. The plug must click
into place audibly.

Make sure that there is fresh tap water in the
boiler of the steam cleaner.

Start-up the steam cleaner according to the
description.

Wait until the steam cleaner is ready to use.
All fabrics can be steam ironed. Delicate imprints
or fabrics should be ironed on the reverse or ac-
cording to the manufacturer’s specifications.
Note: For these sensitive textiles, we recom-
mend using the KÄRCHER non-stick ironing sole
BE 6006 (Ordner no. 2.860-142.0).

Adjust the temperature control of the steam
iron within the notched range (•••/MAX).

As soon as the indicator lamp of the heater
of the iron switches off, you can start ironing.
Note: The sole plate must be hot to prevent
the steam from condensing on the sole plate
and dripping onto the garment to be ironed
.

Use the top or bottom steam switch.
– Steaming at intervals: Press the steam
switch. Steam will be emitted while the
switch is pressed.
– Continuous steaming : Pull the latch for the
steam switch toward the rear until it locks in.
Steam will escape continuously. To unlock,
push the lock forward.

Direct the first burst of steam at the start of
the ironing process or after ironing breaks at
a separate piece of cloth until the steam is
emitted evenly.

You can hold the iron in an upright position
to apply steam to curtains, dresses, etc.
Note: Even if you iron without steam, there must
be water in the boiler.

Adjust the temperature of the iron according
to the garment you want to iron.
Note: Please observe the ironing and washing
instructions in your garment .

As soon as the indicator lamp of the heater
of the iron switches off, you can start ironing.
Floor nozzle
Parking the floor nozzle
Steam iron
Steam ironing
Dry ironing
• Synthetics
•• Wool, silk
••• Cotton, linen
18 EN