Kärcher K 7, Manual

Page: 8 / 28

8
Illustrations on fold-out page!
1 Water connection with integrated sieve
2 Coupling element for water connection
3 High pressure hose connection
4 Storage for trigger gun
5 Appliance switch "0/OFF“/ „I/ON“
6 Dosage regulator for detergent
7 Storage for trigger gun
8 Transport handle
9 Plug 'n' Clean detergent bottle with
locking lid
10 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
11 Storage for accessories
12 Storage hook for mains connection cable
13 Mains cable with mains plug
14 Wheels
15 Trigger gun
16 Lock trigger gun
17 Key to detach the high pressure hose
from the trigger gun
18 High pressure hose
19 Spray lance with pressure regulation
(Vario Power)
20 Spray lance with Dirtblaster
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Mount loose parts delivered with appliance
prior to start-up.
 Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Illustration
Insert the top holder and push down all
the way.
Option
 Illustration
Install the top storage hook.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
 Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Option
 Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
몇
Warning
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
Caution
Always connect the system separator to
the water supply, never directly to the appli-
ance!
Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Operation
Description of the Appliance
Special accessories
Before Startup
Install the storage for trigger gun
Install the storage hook for the mains
connection cable
Install the dosage regulator for
detergent
Install the transport handle
Connect the high pressure hose to the
trigger gun
Water supply