background image

12 

English

Only trigger the high-pressure jet at the 
high-pressure gun if the T-Racer is lo-
cated on the surface to be cleaned.

There must be no persons in the imme-
diate vicinity of the cleaning head.

Beware of the recoil force! Ensure a 
stable position and firmly hold the high-
pressure gun with the extension tube or 
the handle.

Switch off the high-pressure cleaner 
when you finish cleaning. If you are us-
ing the T-Racer then disconnect the 
same from the high-pressure gun.

Maximum water temperature 60°C 
(please observe the instructions of your 
high-pressure cleaner).

Danger!

Do not hold under the edge of the 
T-Racer when it is on!

When unpacking the product, make sure 
that no accessories are missing and that 
none of the package contents have been 
damaged. If you detect any transport dam-
ages please contact your dealer. 

See page 11, illustration 

1 Casing
2 Bayonet connection with safety cover
3 Extension tube
4 High pressure nozzle
5 Rotor arm

The T-Racer is ideally suited for the cleaning 
of floor and wall surfaces made of different 
materials, such as wood, plastic, concrete, 
tiles, and natural stone. Use the T-Racer ex-
clusively in your private household.

Note

: Always use Kärcher water filter (or-

der no. 4.730-059.0) during suction opera-
tions of the high-pressure cleaner.

Fasten the T-Racer to the high-pressure 
gun using the extension pipe.

Illustration 

1 Press the extension tube into the bayo-

net connection of the high-pressure 
gun, then turn by 90° until it locks into 
place.

2 Tighten the safety cover.
Repeat this process even for the other con-
nections.

Outdoor surfaces should be swept be-
fore the T-Racer is used to avoid dam-
aging the high-pressure nozzles.

The T-Racer is not suited for scouring 
or scrubbing!

Caution

Illustration 

Do not run over free-standing corners!

Fasten the T-Racer directly to the high-
pressure gun. 
1 Press the bayonet connection of the T-

Racer into the connection of the high-
pressure gun, then turn by 90° until it 
locks into place.

2 Tighten the safety cover.

Caution

Illustration 

Always hold the high-pressure gun with 
both the hands while cleaning the walls.

Safety instructions

Symbols on the machine

Description of the Appliance

Proper use

Application

Cleaning floor surfaces

Tips for cleaning

Cleaning wall surfaces

Summary of Contents for K 3.170 T 50

















Reviews: