background image

English

Spray the detergent sparingly on the dry 
surface and allow it to react, but not to dry.

Spray off loosened dirt with the high-
pressure jet.

With powerful foam for effortless cleaning.
Illustration 

Fill the detergent solution in the deter-
gent tank of the foam nozzle (observe 
dosage instructions on the packaging of 
the detergent).

Connect the detergent tank to the foam 
nozzle.

Connect the foam nozzle to the trigger 
gun.

Note:

 This will mix the detergent with 

the water stream.

Release the lever on the trigger gun.

Lock the lever on the trigger gun.

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

After operation with detergent: Fill the de-
tergent tank with clear water, turn the 
spray lance with pressure regulator to the 
position "Mix", switch the appliance on for 
about 1 minute and rinse with clear water.

Release the lever on the trigger gun.

Turn off the appliance "0/OFF".

Turn off tap.

Detach the appliance from the water supply.

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Lock the lever on the trigger gun.

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Pull the appliance by its transport handle.

Empty detergent tank.

Secure the appliance against shifting 
and tipping over.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
when selecting a storage location for it (see 
Specifications).

Prior to extended storage periods, as dur-
ing the winter, also observe the instructions 
in the Care section.

Park the machine on an even surface.

Press the disconnect on the hand spray 
gun and remove the high pressure hose 
from the hand spray gun.

Insert the trigger gun in its holder.

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.

Recommended cleaning method

Foam nozzle

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Storage

Storing the Appliance

Summary of Contents for K 3.170 T 50

















Reviews: