English
13
High-pressure cleaner does not build up
the pressure or is vibrating
.
Dismantle the high-pressure nozzles,
check the high-pressure nozzles for
damage, rinse the T-Racer with clean
water then reinstall the high-pressure
nozzles.
Illustration
1 Remove the clip.
2 Pull out the high-pressure nozzle.
3 Rinse the high-pressure nozzle with
clean water, replace if necessary.
4 Insert the nozzle.
5 Re-insert the clip.
You can use the extension pipes with any
other Kärcher accessory.
Use a moist cloth and clean the appliance
after use.
Troubleshooting
Cleaning the high-pressure nozzle
General information
Tip
Care