![background image](http://html2.mh-extra.com/html/karcher/k-2-93/k-2-93_operating-instructions-manual_4227592013.webp)
English
13
You can remedy many faults yourself by us-
ing the following overview.
If in any doubt, please contact the author-
ised customer service.
Risk of electric shock
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Warning
Repair works may only be performed by the
authorized customer service.
Machine does not start
"
Check whether the voltage indicated on
the type plate corresponds to the voltage
of the socket.
"
Check the power cord for damage.
Pressure does not build up in the appli-
ance
"
Check the setting at the spray lance.
"
Evacuate air from the appliance: Switch
on the appliance when the HP hose is
not connected and allow it to run until the
water which discharges from the HP out-
let is free of bubbles. Then connect the
HP hose again.
"
Clean the filter in the water supply con-
nection: This can be easily removed us-
ing flat-nose pliers.
"
Check all supply lines to the HP pump for
leaks or blockages.
Strong pressure fluctuations
"
Clean the high-pressure nozzle: Re-
move dirt and debris from the nozzle
bore with a needle and rinse through with
water towards the front.
"
Check the volume of incoming water.
HP pump leaking
"
Slight leakage from the HP pump is nor-
mal. If the leakage increases contact the
authorized customer service.
No detergent infeed
"
Clean the filter of the detergent suction
hose.
"
Select the low-pressure setting for the
spray lance.
Call:
01-800-024-13-13
for help or visit our
website:
www.karcher.com.mx
Faults
Specifications
Max. Pressure
1400 PSI
Water volume
300 l/h
Amp draw
10 AMPS
Voltage
127 V / 60 Hz
Part No.
1.601-105.0
Serial no.
Kärcher Customer Support
Mexico
Summary of Contents for K 2.93
Page 1: ...Espa ol English Fran ais 5 961 836 12 05 K 2 93...
Page 2: ...2 RM ON ON ON ON 0...
Page 19: ...19...