English
17
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Illustrations on Page 2
1 Coupling element for water connection
2 Water connection with integrated sieve
3 High pressure connection
4 Detergent suction hose (with sieve)
5 Carrying handle
6 Mains cable with mains plug
7 Appliance switch „0/OFF“ / „I/ON“
8 Trigger gun
9 Lock trigger gun
10 Clamp for high pressure hose
11 High pressure hose
12 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks.
The working pressure can be continu-
ously increased from "SOFT" to
"HARD". To adjust the working pres-
sure, release the trigger gun lever and
turn the spray lance to the desired posi-
tion.
Suitable for use with detergents.
13 Spray lance with Dirtblaster
For strong contaminations.
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
Pull out the clamp for the high pressure
hose from the trigger gun.
Illustration
Connect high pressure hose to trigger
gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Park the appliance on an even surface.
Illustration
Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Insert the mains plug into the socket.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Illustration
Attach the water supply hose to the
coupling on the water connection.
Connect the water supply hose to the
water supply.
Completely open the water tap.
Description of the Appliance
** Additionally required
14 Use a fabric reinforced water hose.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly
Start up
Water supply from mains
