Kärcher HG 43, Manual

Page: 17 / 154

– 5

Remove the high-pressure hose from
the high-pressure input.

Pull main plug out of socket with dry
hands only.

Insert the trigger gun in the holder on
the frame together with the spray lance.

Roll up high pressure hose and electri-
cal conduit and hang them into the re-
spective holders.
Note:
Do not twist high pressure hose and
electrical conduit.
For longer work breaks or if a frost free stor-
age is not possible:

Drain water.

Flush device with anti-freeze agent.
(See "Care and maintenance".)
몇
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
ATTENTION
Protect the trigger from damage during
transport.
몇
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.

When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

DANGER
Risk of injury by inadvertent start-up of ap-
pliance and electric shock. Prior to all work
on the appliance, switch off the appliance
and pull the power plug.

Switch the device off (see "Operation").

Allow device to cool down.
Your Kärcher vender will inform you
about the performance of a periodic
safety inspection resp. signing of a
maintenance contract.

Check fuel sieve, clean if necessary.

Check fuel pre-filter, clean if necessary.

Check fuel filter, clean if necessary.

Check sieve in the water shortage safe
guard, clean if necessary.

Decalcify appliance.

Have the maintenance of the device
performed by the customer service.
Carry out maintenance work on the cold
water high-pressure cleaner as directed in
the manufacturer's operating instructions.

Knock the dirt off of the fuel sieve. Do
not let the fuel enter the environment.

Pull the rubber cover out of the fuel
tank.

Clean fuel pre-filter.

Reinsert the rubber cover.

Dismantle the fuel filter.

Clean fuel filter.

Reassemble the fuel filter.

Remove the fastening clamp and pull
out the hose (soft damping system).

Take out sieve.
Note: If necessary turn in screw M8 appr. 5
mm inwards and therewith pull out sieve.

Clean sieve in water.

Push sieve inwards.

Slide the hose adapter all the way into
the lack of water fuse and secure it with
a fastening clamp.
Storing the Appliance
Shutdown
Storage
Transport
Care and maintenance
Maintenance intervals
Weekly
Monthly
Every 500 operating hours, at least
annually
Maintenance Works
Cold water high-pressure cleaner
Clean the fuel sieve
Cleaning fuel pre-filter
Cleaning fuel filter
Clean sieve in the water shortage safe
guard
16 EN