background image

WARNING 

When using this product basic precautions 
should always be followed, including the 
following:

1 Read all the instructions before using 

the product.

2 High pressure jets can be dangerous if 

misused. The jet must not be directed at 
persons, animals, electrical devices, or 
the unit itself.

3 To reduce the risk of injury, close super-

vision is necessary when a product is 
used near children.

4 Know how to stop the product and 

bleed pressures quickly. Be thoroughly 
familiar with the controls.

5 Stay alert – watch what you are doing.
6 Wear safety goggles.
7 Do not use acids, alkaline, solvents, or 

any flammable material in this product. 
These products can cause physical in-
juries to the operator and irreversible 
damage to the machine.

8 Do not operate the product when fa-

tigued or under the influence of alcohol 
or drugs.

9 Do not overreach or stand on unstable 

support. Keep good footing and bal-
ance at all times.

10 To reduce the risk of electrocution, 

keep all connections dry and off the 
ground. Do not touch plug with wet 
hands.

11 The Trigger Gun Safety Lock prevents 

the trigger from accidentally being en-
gaged. This safety feature DOES NOT 
lock trigger in the ON position.

12 Keep operating area clear of all persons.
13 Close cover before operating the ma-

chine.

14 This appliance is intended for commer-

cial use.

15 Follow the maintenance instructions 

specified in the manual.

16 This machine has been designed for 

use with cleaning chemicals supplied or 
recommended by the manufacturer. 
The use of other cleaning chemicals 
may affect the operation of the machine 
and void the warranty.

– Injection hazard: equipment can cause 

serious injury if the spray penetrates the 
skin. Do not point the gun at anyone or 
any part of the body. In case of penetra-
tion seek medical aid immediately.

– This system is capable of producing 

2520 psi/17.3 MPa.
To avoid rupture and injury, do not op-
erate this pump with components rated 
less than 2520 psi/17.3 MPa working 
pressure (including but not limited to 
spray guns, hose and hose connec-
tions).

– Before servicing, cleaning, or removal 

of any part, shut off power and relieve 
pressure.

– Do not spray electrical apparatus and 

wiring.

– High Pressure. Keep clear of nozzle.
– If connection is made to a potable water 

system, the system shall be protected 
against backflow.

– The owner and/or user must have an 

understanding of the manufacturer’s 
operating instructions and warnings be-
fore using this pressure washer.

– Warning information should be empha-

sized and understood.

– If the operator is not fluent in English, 

the manufacturer’s instructions and 
warnings shall be read to and dis-
cussed with the operator in the opera-
tor’s native language by the purchaser/
owner, making sure that the operator 
comprehends its contents.

– Owner and/or user must study and 

maintain for future reference the manu-
facturers’ instructions.

IMPORTANT SAFETY INSTRUCTIONS

Owner/User Responsibility

5

EN

Summary of Contents for HDS-E 3.3/25-4M Ec









































Reviews: