background image

English

5

Unsuitable extension cables can be hazard-
ous. Only use extension cables outdoors 
which have been approved for this purpose 
and labelled with a sufficient cable cross sec-
tion:

For connected loads see model rating plate/
Technical Specifications.

Caution!

It is essential that the unit is connected 

to the power supply by means of a plug. An in-
separable connection to the power supply is 
prohibited. The plug is used to disconnect 
from the mains.

Check the power cord with mains plug for 
damage before every use. If the power cord is 
damaged, please arrange immediately for the 
exchange by an authorized customer service 
or a skilled electrician.
The appliance may only be connected to an 
electrical supply which has been installed in 
accordance with IEC 60364.
The minimum fuse rating required at the sock-
et outlet is (see technical specifications).
The plug and coupling of the extension cable 
used must be watertight.

Water connection/Suction feed 
operation

Connection to water main

Caution!

Pay attention to the regulations of the 

water supply company; according to DIN 
1988, the unit may not be connected direct to 
the public drinking water supply. A short-term 
connection via a non-return valve 
(Order no. 6.412-578) is allowed.

For connected loads see Technical Specifica-
tions.

„

Connect a supply hose (not supplied) to the 
water outlet on the unit and to the water in-
let (e.g. water tap).

„

Open water inlet.

Suctioning water from an open container

„

Screw on the suction hose (order no. 
4.440-270) on the water connection.

„

Attach the filter (order no. 4.730-012) at the 
suction hose.

„

Vent the unit before using.

„

To evacuate air from the unit, unscrew the 
nozzle and leave the unit running until wa-
ter exits with no air bubbles. If necessary 
allow unit to continue running for 10 sec-
onds and then switch off. Repeat this pro-
cedure several times.

„

Switch off the unit and screw the nozzle 
back on.

Operating the unit

Danger!

Observe the relative safety regulations 

when using the unit at filling stations or other 
high-risk areas.

Caution!

Only clean engines in places which 

have appropriate oil separators (protection of 
the environment).

Caution!

The jet must not be directed at other 

persons or directed by the user at him/herself to 
clean clothing or footwear.

Only wash animals with the low-pressure fan jet 
(see "Selecting the type of spray").

Operating with high pressure

The unit is equipped with a pressure switch. 
The motor only starts up when the lever is re-
tracted.

„

Set the unit switch to "I".

„

Unlock the hand-held spray gun and retract 
the lever of the gun.

„

Adjust operating pressure and flow rate 
(+/–) by rotating the pressure/flow control 
(infinitely variable). 

!

Summary of Contents for HD 6/13-4 M












Reviews: