– 6
Danger
When adjusting the pressure/quantity regu-
lation, make sure that the screw connection
of the spray lance does not become loose.
Working pressure or quantity can be adjust-
ed either at the pump unit or at the hand
spray gun.
Do not reduce the pressure/ quantity simul-
taneously at both the regulators. The fol-
lowing procedure is to be followed
compulsorily:
Set (+) working pressure and quantity to
maximum at the hand spray gun.
Set the working pressure and quantity
by turning the pressure/ quantity regula-
tion mechanism at the pump unit.
The working pressure can be read from
the manometer.
Pull the lever on the handgun.
Set the pressure/ quantity regulation at
the pump unit to maximum working
pressure and quantity by turning in
clock-wise direction.
Set (+/-) the working pressure and
quantity by turning the pressure/ quan-
tity regulation mechanism at the hand
spray gun.
Pull the lever on the handgun.
Release the lever on the trigger gun.
The appliance switches off after 30 sec-
onds.
Use the safety catch to secure the
handgun lever.
Store the hand spray gun and spray
pipe in the accessory mount.
After operating the water using saline
water (sea water), open the hand spray
gun and rinse the appliance for at least
2 - 3 minutes using tap water.
Release the lever on the trigger gun.
Set the appliance switch to "0".
Shut off water supply.
Activate hand spray gun until device is
pressure less.
Use the safety catch to secure the
handgun lever.
Remove the water inlet hose from the
appliance.
Pull out the mains plug.
Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
몇
Warning
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
Store the appliance in a heated room dur-
ing winter or empty it. During longer breaks
in operation, it is advisable to pump in anti-
frost agents into the appliance.
Screw off water supply hose and high
pressure hose.
Blow through machine with com-
pressed air.
Note
Observe handling instructions of the anti-
freeze agent manufacturer.
Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
Set working pressure and flow rate
Pressure/ quantity regulation at the
pump unit
Pressure/ quantity regulation at the
hand spray gun
Interrupting operation
Finish operation
Frost protection
Drain water
Flush device with anti-freeze agent
19
EN
Summary of Contents for HD 16/15-4 Cage
