Kärcher ESB 28, Service Manual

Page: 9 / 20

English 5.906-522.0 Rev. 01 (08/11)
9
1 Screwdriver

Using a screwdriver, press in both locking latches
on the rear of the ESB 28 and lever them upwards.
1 Fastening screws, electronics cover
2 Toothed belt, brush roller drive
3 Electronics cover
4 Brush roller
5 Covering lid

Remove the housing cover.
1 Toothed belt, brush roller drive
2 Bearing, brush roller
3 Brush roller

Pull the bearing out of the bearing intake on both
sides of the brush roller.

Remove the toothed belt.
1 Axis, brush roller
2 Bearing, brush roller

Remove the bearing from the brush roller.

Insert the bearing onto the new brush roller.

Install the new brush roller in reverse order.
5 Basic settings and service procedures
5.1 ESB 28
5.1.1 Remove the casing cover 5.1.2 Replacing the brush roller