English
5.906-522.0 Rev. 01 (08/11)
17
Remove the electronics cover as described in the
chapter "Replacing the brush roller".
1 Printed board
2 Connecting cable, micro switch
Disconnect the connecting cable of the micros-
witch from the printed circuit board (PCB).
1 Cover, cable channel
Remove the cover of the cable channel upwards.
1 Micro switch
Remove the microswitch from the intake toward
the top.
Replace the micro switch.
1 Connecting cable, micro switch
2 Connecting cable, engine
Insert the connecting cable into the cable channel.
1 Cover, cable channel
Replace the cover and close the cable channel.
Connect the connecting cable to the PCB as per
circuit diagram.
5.2.10Replacing the micro switch
