Kärcher ESB 28, Service Manual

Page: 10 / 20

10
English 5.906-522.0 Rev. 01 (08/11)

Remove the housing cover.
1 Electronics cover
2 Fastening screws, electronics cover

Unscrew the fastening screws of the electronics
cover.

Remove the electronics cover.

Remove the brush roller as described in the chap-
ter "Replacing the brush roller".
1 Drive pinion, engine
2 Gear belt
3 Toothed wheel, brush roller

Remove the toothed belt from the drive pinion and
the toothed wheel on the brush roller.

Install the new toothed belt in reverse order.

Remove the electronics cover, as described in the
chapter "Replacing the toothed belt".
1 Connecting cable, engine
2 Cover, cable channel

Remove the cover of the cable channel upwards.

Disconnect the connecting cable of the engine
from the printed circuit board (PCB).
1 Motor

Remove the engine from the engine intake toward
the top.

Install the new motor in reverse order.
5.1.3 Replacing the toothed belt 5.1.4 Replace the motor.