English
5.906-522.0 Rev. 01 (08/11)
15
1 Cover, cable channel
2 Motor cable
3 Motor
Remove the cover of the cable channel upwards.
Remove the engine from the engine intake and
thread it out of the toothed belt.
1 Printed board
2 Connecting cable, engine
Disconnect the connecting cable of the engine
from the printed circuit board (PCB).
Replace the engine.
1 Connecting cable, micro switch
2 Connecting cable, engine
Insert the connecting cable into the cable channel.
1 Cover, cable channel
Replace the cover and close the cable channel.
Install the new engine as described in the chapter
"Replacing the toothed belt".
