Kärcher ESB 28, Service Manual

Page: 11 / 20

English 5.906-522.0 Rev. 01 (08/11)
11

Remove the electronics cover, as described in the
chapter "Replacing the toothed belt".
1 Connecting cable to the vacuum cleaner
2 Fastening screws, traction relief
3 Cord grip
4 Printed board
5 Connecting cable

Unscrew the fastening screws of the traction relief
and remove the traction relief.

Disconnect the connecting cable from the printed
circuit board (PCB).

Replace connecting cable.

Install the new connecting cable in the reverse or-
der.

Remove the electronics cover, as described in the
chapter "Replacing the toothed belt".
1 Connecting cable, engine
2 Printed board
3 Hook, PCB mount
4 Connecting cable, connection cable

Disconnect all connecting cables from the printed
circuit board (PCB).

Push the hook of the PCB mount toward the out-
side and remove the PCB toward the top.

Install the new PCB in reverse order and connect
it according to the circuit diagram.
5.1.5 Replace connecting cable 5.1.6 Replace PCB