background image

9.800-083.0  •  Rev. 01/08

5

  

PRESSURE 

W

ASHER

 

OPERA

T

OR’S MANU

AL
  

IMPOr TANT SAfeTy INfOrMATION

rISk Of exPlOSION: 

dO NOT SPrA y   

flAMMABle 

 

lIq UIdS.

WArNING

WARNING:  Flammable  liquids 

can create fumes which can ig-
nite,  causing  property  damage 
or severe injury.

WARNING:  Risk  of  explosion 
—  Do  not  spray  flammable  liq-
uids.

 
10.   Keep  operating  area  clear  of 

all persons.

WArNING

eAr Pr OTeCTION 

MUST Be WOrN

WARNING: This machine exceeds 

85 db appropriate ear protection 
must be worn.

WArNING

USe Pr OTeCTIve   

eye  WeAr  

ANd ClOTHING   

WHeN OPerATING  

THIS eq UIPMeNT.

WARNING: High pressure spray 

can  cause  paint  chips  or  other 
particles  to  become  airborne 
and fly at high speeds. To avoid 
personal  injury,  eye,  hand  and 
foot  safety  devices  must  be 
worn.

 11.  Eye, hand, and foot protection 

must be worn when using this 
equipment.

TrIGGer GUN kICkS 

BACk - HOld  WITH  

BOTH HANdS

WArNING

WARNING:  Grip  cleaning  wand 

securely with both hands before 
starting. Failure to do this could 
result in injury from a whipping 
wand.

12.  To  reduce  the  risk  of  injury,  
 

close supervision is necessary  

 

when a machine is used near  

 

children. Do not allow children 

to  operate  the  pressure  washer.  This  machine 
must be attended during operation.

rISk Of INjeCTION 
Or Severe INjUry 

TO PerSONS. keeP 

CleAr Of NOzzle.

WArNING

WARNING: High pressure devel-

oped  by  these  machines  will 
cause personal injury or equip-
ment  damage.  Keep  clear  of 
nozzle. Use caution when oper-
ating.  Do  not  direct  discharge 
stream  at  people,  or  severe  in-
jury or death will result. 

 

 

 

 13.  Never make adjustments on machine while in op-

eration. 

 14.  Be  certain  all  quick  coupler  fittings  are  secured 

before using pressure washer.

WArNING

Pr OTeCT fr OM 

freezING

WARNING: Protect machine from 

freezing.

15.  To  keep  machine  in  best  
 

operating  conditions,  it  is  

 

important you protect machine  

 

from freezing. Failure to protect  

 

machine  from  freezing  could  

 

cause  malfunction  of  the  

 

machine and result in death, 

serious bodily injury, and/or property damage. Fol-
low storage instructions specified in this manual.

 16.  The best insurance against an accident is precau-

tion and knowledge of the machine.

WArNING

rISk Of INjUry 

fr OM f AllS WHeN 

USING lAdder.

WARNING: Be extremely careful 

when using a ladder, scaffolding 
or any other relatively unstable 
location.  The  cleaning  area 
should  have  adequate  slopes 
and drainage to reduce the pos-
sibility  of  a  fall  due  to  slippery 
surfaces.

 17.  Do  not  overreach  or  stand  on  unstable  support. 

Keep good footing and balance at all times.

 18.  Do not operate this machine when fatigued or under 

the influence of alcohol, prescription medications,  
or drugs. 

19.   Inlet water must be clean fresh water and no hotter 

then 90°F.

 20.  Manufacturer  will  not  be  liable  for  any  changes 

made to our standard machines or any components 
not purchased from us.

 21.  Do not allow acids, caustic or abrasive fluids to pass 

through the pump.

 22.  Never  run  pump  dry  or  leave  spray  gun  closed 

longer than 1-2 minutes.

Follow  the  maintenance  instructions 

specified in the manual. 

Summary of Contents for BG-282037































Reviews: