Kaptur KP2000 User Manual Download | Manualshive

Page: 2 / 33

background image

2 of 33

KP2000 User Manual Version 1.0-EN

The device is manufactured by Trovi Technology CO., LTD. Kaptur brand, logos and Kaptur slogans are prorietary of Trovi
Technology CO.,LTD. and TechSigno srl

While the information found in this manual has been accurately verified, Trovi Technology assumes no liability for errors that
may be herein contained or for damage to property or persons resulting from an improper use of the same or the software
derived from it.
Trovi Technoogy reserves the right to change the contents and the form of this document as well as to modify the product
specifications at any time.

The information contained in this document is property of Trovi Technology to whom all rights are reserved.
No part of this document may be photocopied, reproduced or translated in another language without express written
consent by Techsigno srl.

Trovi Technology Co.,LTD.
410, 4th floor, Sunrise Industry Building, 10 Hong Man Street, Chai Wan, Hong Kong

Email:
Sales:

[email protected]

Assistance:

[email protected]

Web-site:

http://www.kaptur-id.com

We appreciate your comments and suggestions. Send them to:

[email protected]

Trademarks

Trademarks cited in this manual are property of the respective owners.

«
1
2
3
4
...
»

Summary of Contents for KP2000


































Reviews:

No comments

Related manuals for KP2000

VR4 S-MF Series

Brand: Vanderbilt Pages: 24

Brand: 3nStar Pages: 30

Brand: V-tech Pages: 14

Brand: Ting Pages: 5

Brand: Magtek Pages: 70

Brand: Nedap Pages: 27

Brand: Nedap Pages: 59

Brand: Unitech Pages: 169

Brand: Campbell Pages: 10

Brand: Datalogic Pages: 188

Brand: Datalogic Pages: 282

Brand: 2connect Pages: 88

Brand: Cocoon Pages: 24

Brand: Datalogic Pages: 21

Gryphon GM4500 Series

Brand: Datalogic Pages: 60

Gryphon GM44 Series

Brand: Datalogic Pages: 69

Brand: TaoTronics Pages: 37

Brand: Trohestar Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands