10 of 33
KP2000 User Manual Version 1.0-EN
Indication
Power on alert
After power-on the scanner will generate an alert signal to indicate a successful self-test.
LED indication
After each successful reading, the LED above the scanner will light up to indicate a good barcode reading.
Beeper indication
After each successful reading, the scanner will beep to indicate a good barcode reading, and its beep tone duration is
adjustable.
USB interface
The communication interface of the reader is USB
USB device type
HID keyboard
By setting, the scanner is used as a USB HID keyboard emulation device.
USB virtual COM
By setting, the scanner emulates a regular RS232-based COM port. If a Microsoft Windows PC is connected to the scanner, a
driver is required to be installed. The driver will use the next available COM Port number. The driver and the installation
guide can be found in the software package provided on the manufacturer website. A Windows-based software COM_Text is
recommended to display the barcode data in text format. COM_Text emulates some kind of serial-key typing.
Keyboard layout
The scanner supports different national keyboard layouts. Commonly an appropriate encoding system must be selected.
Please refer to Settings to configure and for details
Inter-character delay: This delay is inserted after each data character transmitted. By selecting, the user
can change the output speed of the scanner to match the speed of the host USB communication port.
Ask factory for this settings
Scan mode
Trigger Mode
The trigger button must be pressed, and keep pressed, to activate scanning. The scanner will stop scanning when there is a
successful reading or no code is decoded after the Stand-by duration elapsed.
Continuos Mode
In this configuration the scanner always keeps scanning, and it does not matter when the trigger button is pressed or
duration is elapsed. If a valid code is readed the scanner will emit a beep.
Decode illumination and aim pattern
The scanner for a better quality images use a with light to illuminate the code. The effectiveness of the illumination
decreases as the distance to the target increases.
The scanner will project the aiming red patter during the code capture
Vertical centering read
The scanner reads only the barcode centered by the aimer in vertical direction. However, the scanner will read either one of
two barcodes which are positioned horizontally. See the below example.
