KP2000 User Manual Version 1.0-EN
13 of 33
Add Prefix / Suffix
Is it possible to add a Prefix or a Suffix at any code read. The structure of the trasmitted code will be
Prefix
Barcode
Suffix
Prefix and Suffic can be max 10 ASCII chatacters
For the ASCII Table refere to the chatper relative chapter
In order to add the Prefix or Suffix procede as indicate below
1.
Scan the barcode “Start Configuration”
2.
Check the ASCII table and get the ASCII Code for the Character to add
3.
Scan the barcode of ASCII
4.
Scan End Configuration
Start Configuration((+SETF))
ADD Prefix((+E4A))
ADD Suffix((+E5A))
End Configuration((+ENDF))
Example: Add character “+” as prefix
On the ASCII Table the character “+” is equal to 2B
1
Start Configuration((+SETF))
2
Add Prefix
3
2
4
B
3
End Configuration((+ENDF))
The defualt value for Prefix and Suffix is 00
To remove the Prefix or Suffix procede as per configuration procedure and scan ASCII 00
