Kantech Door Controller Innovative and Powerful KT-300 Installation Manual Download Page 12

Page: 12 / 28

DN1315-1007

KT-300 Door Controller Installation Manual

Electrical Specifications

KT-300 Controller and Accessories

VOLTAGE OUTPUTS

MAXIMUM
CURRENT

(N.A.)

MAXIMUM
CURRENT

(EU)

ABSOLUTE

COMBINED

MAXIMUM

(N.A.)

ABSOLUTE

COMBINED

MAXIMUM

(EU)

Lock Outputs (12 VDC)

500 mA
(250 mA each)

1.0 A
(500 mA each)

Auxiliary Power (11.5 to 13.85 VDC)

175 mA

Reader 5 VDC and 12 VDC

175 mA

Combus

500 mA

Battery Charging (12 VDC)

250 mA

1.5 A

2.0 A

OPEN COLLECTOR OUTPUTS

MAXIMUM
CURRENT

LED (Door 1 & 2)

25 mA (each)

Buzzer (Buz, Door 1 & 2)

25 mA (each)

Controlled Relay 1 & 2 (RL1 & RL2)

25 mA (each)

Kantech Model

Description

KT-300/512K

Door controller with 512K memory including KT-300CAB, KT-300ACC and KT-
LOCK

KT-300PCB/512

KT-300/512K PCB only and KT-300 ACC (not UL listed)

KT-300ACC

Accessory kit including: 2 X 1.0k ohm, 10 x 5.6k ohm, 2 x 120 ohm, PCB standoffs,
lock hole cover, ground wire and screwdriver

KT-PC4108

8-zone input expansion module for KT-300

KT-PC4204

4-Relay and Combus additional power supply module for KT-300

KT-PC4216

16-Output expansion module for KT-300

KT-RM1

External isolation relay SPDT for KT-300 output (RL1/RL2) (not UL listed)

KT3-LCD

Time & date LCD display unit for KT-300

KT-300CAB

KT-300 black metal cabinet including KT- LOCK

KT-4051CAB

Standard black metal cabinet for KT-PCxxx modules (order keylock separately)

KT-LOCK

Keylock for KT-300CAB/KT-4051CAB metal cabinet (2keys/same as KT-200)

KT-TAMP

Tamper switch for KT-300CAB/KT-4051CAB metal cabinet

TR1637W/CSA

Transformer, Wire-in, 110V/16V (37VA) CSA (not UL listed)

TR1640P/CSA

Transformer, Plug-in, 110V/16V (40VA) CSA (not UL listed)

TR1640P/UL

Transformer, Plug-in, 110V/16V (40VA) UL or DSC PTD1640 www.dsc.com

TR1640W-220

Transformer, Wire-in, 230V/16V (40VA) CE (not UL listed)

Summary of Contents for Door Controller Innovative and Powerful KT-300





























Search results

Summary of Contents for Door Controller Innovative and Powerful KT-300

Reviews:

Related manuals for Door Controller Innovative and Powerful KT-300

Brands by name

Popular brands

Kantech Door Controller Innovative and Powerful KT-300, Installation Manual

Search results

Summary of Contents for Door Controller Innovative and Powerful KT-300

Reviews:

Related manuals for Door Controller Innovative and Powerful KT-300

Brands by name

Popular brands