background image

 

36     

7. Warranty and After-Sales Services 

The limited warranty set below is given by KANOMAX JAPAN, Inc. (hereafter referred to as “KJI”) with 
respect to this instrument, its attachment parts including standard accessories (hereafter referred to as 
“PRODUCT”) that you have purchased.    PRODUCT you have purchased shall be the only one that the 
limited warranty stated herein applies to. 
 
Your PRODUCT, when delivered to you in new condition in its original container, is warranted against 
defects in materials or workmanship as follows:    for a period of two (2) years from the date of original 
purchase,  defective  parts  or  a  defective  PRODUCT  returned  to  KJI,  as  applicable,  and  proven  to  be 
defective upon  inspection,  will  be exchanged  for  a  new  or  comparable  rebuilt  parts,  or  a  refurbished 
PRODUCT as determined by KJI.    Warranty for such replacements shall not extend the original warranty 
period of the defective PRODUCT. 
 
To obtain service under this warranty, you must notify KJI on or before the expiration of the warranty 
period to obtain directions for returning the defective product.    You are responsible for all return shipping 
charges to the authorized KANOMAX service center.     
 
This limited warranty covers all defects encountered in normal use of the PRODUCT, and does not apply 
to the following cases: 
(1) Use of parts or supplies other than the PRODUCT sold by KJI, which cause damage to the PRODUCT 
or cause abnormally frequent service calls or service problems.   
(2) If any PRODUCT has its serial number or date altered or removed. 
(3)  Loss  or  damage  to  the  PRODUCT  due  to  abuse,  mishandling,  improper  packaging  by  the  owner, 
alteration,  accident,  electrical  current  fluctuations,  failure  to  follow  operating,  maintenance  or 
environmental instructions prescribed in the PRODUCT's instruction manual provided by KJI, or service 
performed by other than KJI. 
 
NO  IMPLIED  WARRANTY,  INCLUDING  ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS 
FOR  A  PARTICULAR  PURPOSE,  APPLIES  TO  THE  PRODUCT  AFTER  THE  APPLICABLE  PERIOD  OF  THE 
EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, 
EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT 
SHALL BIND KJI.    KJI SHALL NOT BE LIABLE FOR LOSS OF STORAGE CHARGES, LOSS OR CORRUPTION 
OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE 
OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH 
THE CLAIM IS BASED, AND EVEN IF KJI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.   
IN  NO  EVENT  SHALL  RECOVERY  OF  ANY  KIND  AGAINST  KJI  BE  GREATER  IN  AMOUNT  THAN  THE 
PURCHASE PRICE OF THE PRODUCT SOLD BY KJI AND CAUSING THE ALLEGED DAMAGE.    WITHOUT 
LIMITING THE FOREGOING, THE OWNER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OF, 
OR INJURY TO THE OWNER AND THE OWNER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY 
ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED DIRECTLY 
BY  THE  NEGLIGENCE  OF  KJI.    THIS  LIMITED  WARRANTY  SHALL  NOT  EXTEND  TO  ANYONE  OTHER 
THAN THE ORIGINAL PURCHASER OF THE PRODUCT, OR THE PERSON FOR WHOM IT WAS PURCHASED 
AS A GIFT, AND STATES THE PURCHASER'S EXCLUSIVE REMEDY.

 

 

Summary of Contents for 6333









































Reviews: