Kanomax 6333, User Manual, Page: 7 / 40

v
Do not use or keep the instrument in hot, humid, or dusty
environment. Do not expose the instrument to direct sunlight
for a prolonged period of time.
The instrument may not function properly out of the specified
operational temperature range.
Do not subject the instrument and/or the probe to strong
shocks.
Dropping or hitting the instrument and/or the probe may
cause damage and malfunction.
Do not disassemble, modify, or attempt to repair the
instrument.
Failure to observe the above may result in a short circuit or a
malfunction.
Do not hold the probe cable to carry the instrument.
Failure to observe the above may cause damage or wire
disconnection.
Do not use volatile solvents such as thinner or benzene to
clean the instrument.
The case of the instrument may be damaged by organic
solvents. Use a soft dry cloth to remove any dirt. If this is not
effective, the user may soak the cloth in neutral detergent or
water and wipe the instrument with the cloth.
Do not allow static electrical discharge to the air velocity
sensor.
Failure to observe the above may affect measurement values
and cause damage to the instrument circuit.
Regularly check that the tip of the probe is clean.
Dust and/or foreign substances adhered to the air velocity
sensor can hinder accurate measurement.
To remove dust, blow it off with a blower brush for cameras or
lightly rinse with water and dry it well.
※Be sure to turn the power off to the main unit before
cleaning the air velocity sensor.
※Never dry the probe by heat. (Failure to observe this may
cause damage to the air velocity sensor.)
Forbidden
Do not disassemble
Forbidden
Forbidden
Forbidden
Electrostatic-sensitive devices
Forbidden
Prober Handling
Forbidden