3. Display Description and operation Procedure
16
3.4.2 Calculation Mode
Select “CALCULATION” mode on the menu screen to display the screen
shown on the left.
In the CALCULATION MODE you can set date & time to start a
measurement, sampling time and number of sampling trials.
Use [
▲
] [
▼
] keys to move the cursor to the item to be set. Then press
[SET] key to configure each setting.
START DATE/TIME: Date & time to start a measurement
SAMPLING TIME:
Sampling time (1 sec ~ 99 min 59 sec)
No. TRIAL (N):
No. of sampling trials (1 ~ 30,000 times)
SET TO START:
To start a measurement
To go back to the menu screen before you complete the setting, press
[MENU] key.
A)
Measurement Start Date & Time
Set each figure in the order of Year
→
Month
→
Date
→
Hour
→
Min
→
Sec
if JP is selected for date mode. (Refer to
3.4.6 Utility B)Time
Adjustment
)
Use [
▲
] key to increase the value of the highlighted item and [
▼
] key to
decrease the value.
Press [SET] key to move the cursor to the next item.
After setting the second, the date and time will stop being highlighted,
and now you can select the next item to be configured.
B)
Sampling Time
Set sampling time.
Use [
▲
] key to increase the value of the highlighted item and [
▼
] key to
decrease the value. The settable range is 1 sec ~ 99 min 59 sec.
After setting the sampling time, press [SET] key. Then the time will stop
being highlighted, and now you can select the next item to be configured.
C)
The Number of Sampling Trials
The number of sampling trials will be highlighted. Use [
▲
] to increase
the value and [
▼
] key to decrease. The settable measurement cycle is up
to 30,000 times.
Press [SET] key to complete setting. The set value will stop being
highlighted, and now you can select the next item to be configured.
D)
To Start a Measurement
Press [SET] key to go back to the initial screen and the instrument will
start stand-by for starting a measurement.
When the configured date and time comes, a measurement will start.
