INITIAL INSTALLATION MANUAL
AF INTEGRA / AF-H INTEGRA
PAGE: 3
JUN 01/2011
C. Remote Control Panels (RCP)
Refer to Section 12. Compatibility list for INTEGRA ELTs System, page 53
for
Part Numbers of approved RCPs.
The RCP must be installed in the cockpit to monitor and control the ELT status.
It must be connected via a 2, 3, or 4-wire bundle to the DIN-12 socket of the
ELT (2, 3, 4-wire bundle is not supplied)
Note: An optional outside buzzer assembly can be connected to the ELT-
RCP. It gives an audio indication of emergency location transmitter
(ELT) activation. It is supplied with a mounting tray to install the buz-
zer on the aircraft.
Figure 3: Outside buzzer
(1)RC100 KIT
The RC100 remote control panel is connected to the ELT via a 3-wire
cable equipped with a DIN-12 connector or optional programming dongle
on the ELT side and directly connected to the RCP on the other side.
Figure 4: RC100 Remote Control Panel
Summary of Contents for AF INTEGRA
Page 59: ......
