20
Service and Repair Manual
Model 1400KV/1400BV
1.
Insert the latch bar (4) into the hole of the
nosepiece (8).
2.
Fit the spring cover (5), spring (6) and latch
retainer (7) over the latchbar.
3.
Using a suitable drift, tap the latchbar (4) into the
latchbar retainer (7).
Fitting the
Tool Locking
Mechanism
(1400, 1400B)
4
8
5 6 7
Fitting the
Driver
(1400M)
1.
Fit seal (12) on anvil (119), fit anvil (119), recoil
TR ring (125) and junk ring (123).
2.
Fit the following items:
- junk ring (118)
- ‘O’ ring (126)
- driver (117)
- ‘O’ ring (126)
3.
Fit the following items and secure using six
screws (35):
- trans housing (124)
- ‘O’ ring (121)
- nose cover (120)
- nose piece (115)
- four balls (114)
1.
Fit the following items and secure using two
latches (108):
- lock chuck (112)
- lock plate (111)
- spring (110)
- latch plate (109)
2.
Fit the following items and secure using wire clip
(104):
- SDS chuck (107)
- buffer (106)
- buffer stop (105)
3.
Fit chuck cover (103) and end cap (102).
Assembling
the SDS
assembly
(1400M)
Fig. 37
Fig. 38
Fig. 39
35
114 115
117
118
126
119 12
123
125
124
122
121
120
102
104
106 108
109
111
103
105
107
108
110
112
Summary of Contents for 1400 Series
Page 1: ......
