Kane KANE101, Manual

Page: 35 / 48

Page 35
14. ANALYSER ANNUAL SERVICE & RE-CERTIFY
Although sensor life is typically more than five years, the analyser should
be serviced and re-certified annually to counter any long-term sensor or
electronics drift or accidental damage.
Local regulations may require more frequent re-certification.
Kane International has service facilities at Atherton near Manchester Tel:
01942-873434 (the primary service centre for UK customers) and at
Welwyn Garden City in Hertfordshire Tel: 01707-375550 (the primary
service centre for non-UK customers).
By sending your analyser back to Kane for an annual fixed price service
(check
www.kane.co.uk for details) you have the opportunity to extend
the warranty on your analyser to 5 years.
14.1 SERVICE - CALIBRATE - RECERTIFY
YOU CAN COUNT THE REASONS WHY ON ONE HAND!
1. Fixed prices ensure you know the full cost of ownership before you
buy.
2. Flue Gas Analysers will drift out of calibration over time
– only Kane
can adjust them back to the manufacturers' specification & return
them as accurate as when they were purchased.
3. Analysers always seem to require a service when you need them
most! Kane's two UK Service Centres pride themselves on their fast
service turnaround times.
4. Every Kane analyser is returned with a fully traceable calibration
certificate & another 12 months warranty. After 6 years, warranty
becomes limited to replacement parts only.
5. In some cases an out-of-calibration analyser means any combustion
reports you produce are invalid, so it is very important you get your
analyser recertified