Kane KANE101, Manual

Page: 27 / 48

Page 27
10. MAINTENANCE
10.1 EMPTYING AND CLEANING THE INTEGRAL WATER
TRAP
The water trap should be checked and emptied on a regular basis. Water
vapour will condense in the probe line, which may cause the water trap
to fill suddenly if the probe is moved. Care should be taken at all times.
Emptying of the water trap is detailed below: -
Carefully unscrew the red bung from the bottom of the water-trap
housing. Dispose of the condensate in a suitable drain, care must be
taken as it could be acidic.
If condensate spills onto the skin or clothing, clean off immediately using
fresh water, seek medical advice if problems occur. Ensure the bung is
replaced before performing further combustion tests.