MULTICAL® 801
Kamstrup A/S · Technical Description · 5512-571_R1_GB _11.2016
119
17
Environmental declaration
Kamstrup A/S holds an environmental certification according to ISO 14001, and as part of our environment policy
we use materials, which can be recovered environmentally correct to the greatest possible extent.
Kamstrup A/S has calculated carbon footprint of all meters.
17.1
Disposal
•
Disposal by Kamstrup A/S
Kamstrup accepts worn-out meters
for environmentally correct disposal according to previous agreement. The
disposal is free of charge to the customer, except for the cost of transportation to Kamstrup A/S.
•
The customer sends for disposal
The meters must not be disassembled prior to dispatch. The complete meter is handed in for approved
national/local disposal. Enclose a copy of this
chapter
in order to inform the recipient of the contents.
Item
Material
Recommended disposal
Lithium cells in MULTICAL
801 (Backup
battery, type: 66-99-619)
Lithium and thionyl chloride, 2 pcs.
A-cell lithium 0.96 g lithium each
Approved deposit of lithium
cells
PCBs in MULTICAL
801
(LC-display is removed)
Coppered epoxy laminate, soldered
on components
PCB scrap for metal recovery
LC display
Glass and liquid crystals
Approved processing of LC-
displays
Cables for flow sensor and sensors
Copper with silicone mantle
Cable recovery
Transparent top cover and sealing cover,
bottom
PC
Plastic recovery
Connection bracket
PC + 10 % glass
Plastic recovery
Sealing cover, top
ABS
Plastic recovery
Prism behind display
PMMA
Plastic recovery
Packing
Polystyrene
EPS recovery
17.2
Transport restrictions
MULTICAL
801 can be transported without restrictions (not dangerous goods). The built-in backup battery fulfils
the requirements of both EN 50020 ”Intrinsic safety transport” and IEC 86-4 ”Safety standard”.
Please send any questions you may have regarding environmental matters to:
Kamstrup A/S
Att.: Miljø- og kvalitetsafd.
Fax.: +45 89 93 10 01
Heat meters from Kamstrup are marked according to the EU directive
2012/19/EU and the standard EN 50419.
The purpose of marking is to inform that the heat meter cannot be disposed
of as ordinary waste.
