Ultra
Assembly, installation and operating instructions
22
6.3.4 Assembly of the intake crown
IMPORTANT NOTE!
Accessory components are no longer accessible once the intake crown has been fitted!
Only
fit the intake crown once all connection and installation work has been completed. The motor junction
box, valves, motor guard, condensate pump etc. are then no longer accessible!
Screw one of the screws supplied into the screw hole provided on each of
the 6 individual components.
Connect up 2 sections in each case.
Join each of the 2 parts of the intake crown together and screw through the
second fin opening from the bottom.
Fix the pre-assembled sections in their allocated position on the base plate
(with the fins pointing downwards).
Screw the sections together.
