6
.
1.42
Katherm QK –
Trench convector with energy-efficient EC tangential fan
Ready-to-install convector-based trench convectors
Assembly and installation instructions
3. Scope of delivery
Katherm QK trench convectors are supplied as standard in a box with:
• Height adjustment feet
1
with rubber pads for acoustic decoupling
2
,
screws and rawlplugs to be provided on site
• Raised floor feet with plastic cap for acoustic decoupling
3
,
4
.
4. Alignment and positioning
4.1 Alignment using height-adjustment feet and raised floor
brackets
• Remove the outer film and the packaging.
• Flap open the transparent protective cover.
Important:
Do not remove bracing during installation and operation.
• Arrange the
Ka
therm
QK with the convector on the window side.
Important:
The height adjustment feet are already fitted to the trench
convector. They are fixed the wrong way round for transport reasons.
To install and adjust the height of the trench, loosen the outer fixing nuts
on the adjustment feet and turn the height adjustment feet 180° so that
the foot is pointing outwards (see Fig.)
•
Then level the trench convector and adjust the height using the
adjustment feet and adjustment screws on the raised floor brackets
3
.
• Ensure that the trench is horizontal and not twisted. Otherwise the grille
will not fit into the floor trench.
• Use screws and dowels to fix the height-adjustment feet
1
with rubber
pads for sound insulation
2
.
1
1
2
3
4
2
3 4
