24
.
1.42
Katherm QK –
Trench convector with energy-efficient EC tangential fan
Ready-to-install convector-based trench convectors
Assembly and installation instructions
11.5 KaControl model
Model for room automation and networking.
Product features
• A high-performance parametrised microprocessor is designed to carry
out all necessary functions. Each
Ka
therm
QK is therefore equipped with
its own "intelligence" and can be operated in groups via Kampmann
networks.
Connection to building automation systems
•
Ka
therm
QK with KaControl option can be equipped with plug-in
communication interfaces for controlled operation in individual rooms
or for linking into higher-order control systems: BACnet, CAN bus, LON,
KNX and Modbus. Direct control via an active 0-10 V signal from the
on-site building management system is alternatively possible.
Motor protection
• Any faults with the motor e.g. overloading are analysed by the electronics
within the EC motor. This then switches the fan off.
KaControl
The parametrisable KaControl offers a wide range of functions:
• Optional: 5 fan speed settings; manually adjustable
• Valve control for 2-pipe applications for thermoelectric valve actuators 24
V DC OPEN/CLOSE
• Integrated timer program for programming day and week switching
functions in the KaController unit
• Motor monitoring with fault signal processing
Applications of the KaController
The
Ka
therm
QK and associated room control units can only be used:
• indoors (for instance in residential properties and offices, showrooms etc.)
KaControllers should not be used
• outdoors,
• in humid areas, such as swimming pools, in wet rooms,
• in areas where there is a risk of explosion,
• in areas with a high dust content,
• in areas with an aggressive atmosphere