ZEUS-VD INSTALLER’S MANUAL
9.14
SECURITY LEVEL - SL
Which telephone number stored into the phone book from TN1 – TN0 can enter into programming
and remote control unit of the ZEUS4-VD (dialing the ZEUS4-VD No. or sending the SMS) is
defined by SL parameter form SL0 to SL10.
NOTE: When the SL level is 0, an access to the ZEUS4 is possible from any phone!
NOTE: Before any SL number is programmed the ZEUS4-VD can accept ALL CALLS.
Remote SMS programming and remote controlling is possible from any phone!
9.14.1
Programming table for security level definition – SL
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
SL 0
All calls and SMS will be accepted
SL 1
Only number stored under parameter TN1 has access to unit
SL
2
Numbers stored under parameters TN1 to TN2 have access to unit
SL
3
Numbers stored under parameters TN1 to TN3 have access to unit
SL
4
Numbers stored under parameters TN1 to TN4 have access to unit
SL
5
Numbers stored under parameters TN1 to TN5 have access to unit
SL
6
Numbers stored under parameters TN1 to TN6 have access to unit
SL
7
Numbers stored under parameters TN1 to TN7 have access to unit
SL
8
Numbers stored under parameters TN1 to TN8 have access to unit
SL
9
Numbers stored under parameters TN1 to TN9 have access to unit
SL
10
Numbers stored under parameters TN1 to TN0 have access to unit
9.14.2
SL parameter remote programming by SMS
For the upper example send the following SMS from the host phone to the ZEUS4-VD:
;SL=2;
If you want to get the confirmation SMS back then write “
+
” before SMS command:
;+SL=2;
Page 24
