ZEUS-VD INSTALLER’S MANUAL
5
START UP
⇒
Insert SIM card to be used for ZEUS4-VD in your personal mobile phone.
⇒
ERASE THE PIN CODE!
⇒
Enter telephone numbers and the required operating parameters in SIM memory – at least 1
telephone No. (TN1) and 1 link (LN1) should be programmed (see installer’s manual)
⇒
Insert SIM card in the GSM module applied for the ZEUS4-VD device. The unit must be
power OFF when you insert the SIM!
⇒
Connect alarm inputs and outputs to ZEUS4-VD
⇒
Connect the antenna to antenna connector
⇒
Connect device to source power supply voltage
⇒
Wait until LED3 display is turned ON (green) and LED1 (blue) starts flashing. This will be
set in around 1 minute time.
⇒
Connect the headset to Play/REC connector and record alarm messages
⇒
ZEUS4-VD unit is now ready for operate.
NOTE:
When the back-up battery 12V/1,2Ah is connected on the unit the main power supply must be
from 13,8V to 14,5V DC!
Page 5
