ZEUS-VD INSTALLER’S MANUAL
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
TN1
1st telephone number (alarm beep & SMS message)
TN2V
040719479
2nd telephone number (alarm beep only)
TN3M
040308350
3rd telephone number (SMS message only)
9.1.1
TN remote programming by SMS
For the upper example send the following SMS from the host phone to the ZEUS4-VD:
;TN1=
042376678
;TN2V=040719479;TN3M=040308350;
If you want to get the confirmation SMS back then write “
+
” before SMS command:
;+TN1=
042376678
;TN2V=040719479;TN3M=040308350;
9.2
PROGRAMMING INPUT STATUS - IN
Alarm and reset input can be triggered in 4 different ways. The status of the input can either be
normal closed (N.C) or normal open (N.O.) with positive (+ 12V) or negative (GND) voltage.
When you need the input feed back information it is possible to get SMS back when input will
return from alarm to normal position. (See cap.5.8 – SMS Messages organizer). To get return SMS
use IN=4,5 or 6.
⇒
IN = 0 – Normal Open – triggered with negative voltage (GND)
⇒
IN = 1 – Normal Close – breaking negative or positive voltage loop
⇒
IN = 2 – Normal Open – triggered with positive voltage (+ 12VDC)
⇒
IN = 3 – Input disable
⇒
IN = 4 = IN = 0 + input reset SMS
⇒
IN = 5 = IN = 1 + input reset SMS
⇒
IN = 6 = IN = 2 + input reset SMS
TYPICAL INPUT CONNECTIONS
GND
INPUT 1-4
N.O.
contact
+12V DC
INPUT 1-4
N.O.
contact
GND
1-4
INPUT
N.C.
contact
+12V DC
INPUT 1-4
N.O.
contact
Page 10
