4
Kambrook Recommends Safety First
IMPORTANT: Please
retain your instruction
book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently use
and trust our products. We ask that any electrical appliance that you use
be operated in a sensible fashion with due care and attention placed on
the following important operating instructions.
Important Safeguards For Your Kambrook
SpeedSteam Iron
•
Carefully read all instructions before
operating the Kambrook SpeedSteam
Iron for the first time and save for
future reference.
•
To protect against electric shock, do
not immerse the iron, cord or plug in
water or any other liquid.
•
Do not use the iron for anything other
than its intended use.
•
Always turn the Variable Temperature
Control to minimum, switch off at
the power outlet, then unplug the
appliance when not in use.
•
Allow the iron to cool completely
before storing in an upright position
on its heel.
•
Do not touch hot surfaces. High
temperatures are generated during
use, which could cause burns. Always
use the handle and warn others
(especially children) of the possible
dangers of burns from steam, hot
water or hot soleplate, especially
when ironing vertically.
•
Regularly inspect the supply cord,
plug and actual appliance for
any damage. If damage is found
in any way, or the iron has been
dropped, immediately cease use of
the appliance and return the entire
appliance to your nearest authorised
Kambrook Service Centre for
examination, replacement or repair.
•
Store the unit out of reach of children.
•
Do not leave the appliance
unattended when in use.
•
The iron must be used and rested on a
stable surface
•
When placing the iron on its heel,
ensure that the surface on which the
heel is placed is stable.
•
The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
•
Do not allow the iron to lay flat on the
soleplate when stored as water may
seep through the steam holes, if the
tank is not empty.
•
Always test the iron on a small,
discreet part of the fabric to be ironed
to ensure the temperature is not set
too high.
•
Always store the iron in the upright
position on its heel. Do not leave the
iron unattended while connected or
on an ironing board.
KI480_IB_D12.indd 4
5/12/12 10:28 AM
