8
Assembly and Operation of Your Kambrook
Hand Mixer
Before First Use
Remove any packaging material and
promotional labels.
When unpacking the hand mixer,
check to see you have received all
the required parts before discarding
the packaging.
Hold the storage case with one hand
whilst holding the mixer body by the
handle with the other hand; pull the
mixer body away from the storage
case to remove.
Remove the beaters and dough
hooks from inside the storage case.
Wash the beaters, dough hooks,
storage case in warm soapy water
with a soft cloth. Rinse and dry
thoroughly.
Wipe the mixer body with a damp
cloth and dry.
WARNING:
Never
immerse the mixer, power
cord or plug in water or
any other liquid.
NOTE:
When first using the hand
mixer you may notice an odour
from the motor. This is normal
and will dissipate as the motor is
run in.
Assembly of the Beaters
WARNING:
Ensure the
hand mixer is switched
off and unplugged from
the power outlet before
attaching the beaters to
the mixer.
1. Insert each beater shaft into the
left and right beater/dough hook
sockets underneath the mixer
body (See Fig. 1).
Fig. 1
2. Insert the beaters by pushing the
shaft into the socket, turning slightly
if required until they lock into place.
NOTE:
Always ensure the beaters
are firmly positioned before
operating.
WARNING:
Beaters must
be inserted into the
correct sockets as they
are not interchangeable.
Incorrect insertion will
result in the beaters falling
out during operation and
cause damage.
Summary of Contents for KHM300 Series
Page 2: ...Suits all KHM300 models INSTRUCTION BOOKLET...
Page 24: ...23 Notes...
