![background image](http://html1.mh-extra.com/html/kambrook/khm300-series/khm300-series_instruction-booklet_3343317011.webp)
10
Operating Your Kambrook
Hand Mixer
1. Ensure the Speed Control Switch is
set to the ‘OFF’ position.
2. Insert the beaters or dough hooks
correctly as required.
3. Select a mixing bowl large
enough to accommodate the
beaters/dough hooks, as a bowl
that is too small will damage the
beaters/dough hooks.
4. Add the ingredients to a mixing
bowl as per the recipe or your
requirements.
5. Press down on the ‘
’ button at
the top of the mixer and gently
pull the power cord out of the
motor body. Plug the power cord
into a 230V or 240V power outlet
and switch the power outlet on.
6. To commence mixing, slide
the Speed Control Switch in a
forward direction using your
thumb. Always begin mixing at
a lower speed setting to prevent
splattering. Increase the speed
suited to the mixing task. The
speed setting can be adjusted
during operation by moving the
Speed Control Switch forward
and back between speeds 1 to 5.
7. Occasionally stop the hand mixer
during operation and scrape any
food mixture down the sides of
the mixing bowl with a spatula.
NOTE:
Always turn the hand mixer
off if you need to scrape the bowl
during use, then continue mixing.
Assembly and Operation of Your Kambrook Hand
Mixer
Continued...
8. When mixing is complete, set the
Speed Control Switch to the ‘OFF’
position. Switch the hand mixer off
at the power outlet and remove
the power cord from the outlet.
9. Sit the hand mixer upright on a
flat surface with the beaters/
dough hooks facing away from
you. Remove the beaters/dough
hooks by pressing the ‘EJECT’
button while grasping the shafts.
The beaters/dough hooks will be
released automatically. Do not
force the beaters/dough hooks
out of the sockets. Use a spatula
to remove the mixture from the
beaters/dough hooks. Do not
strike the beaters/dough hooks on
the rim of a mixing bowl.
WARNING:
After mixing,
take out the beaters/
dough hooks with care as
they may be hot after use.
Boost Function
Pressing the ‘BOOST’ button while
mixing provides an extra burst of
power and overrides the speed
setting being used. Press and hold
the ‘BOOST’ button for no more than
30 seconds at one time to avoid
overheating.
Summary of Contents for KHM300 Series
Page 2: ...Suits all KHM300 models INSTRUCTION BOOKLET...
Page 24: ...23 Notes...