User Manual
OBM
23
5.
SERVICE AND
MAINTENANCE
WARNING
Before any service or cleaning be sure to disconnect the power supply
cable from the power supply!
Maintenance and service within the warranty period may only be performed by the
authorized service person.
Please advise Kambic in before alternation & modification. It is not allowed to change or
rebuild any part of the construction without producer's written permit.
All spare parts are in stock in the producer's magazine. It is only allowed to use the original
spare parts.
Maintenance and service within the warran
ty period may only be done by the producer’s
service department or authorized service.
With proper care the instrument should require very little maintenance. Keep the interior
and the exterior clean. The bath should be cleaned regularly to prevent a buildup of oil or
dust. For cleaning use some soft cleaning detergents and soft cloth.
Periodically check the fluid level in the bath to ensure that the level has not dropped. A
drop in the fluid level affects the stability and dramatically the uniformity of the bath.
Changes in fluid level are dependent upon several factors most often it is the volumetric
expansion of the fluid!
Heat transfer medium lifetime is dependent upon the type of medium and the
environment. The fluid should be checked at least every month. Once some fluids have
become compromised, the break down can occur rapidly. Particular attention should be
paid to the viscosity of the fluid. A significant change in the viscosity can indicate that the
fluid is contaminated, being used outside of its temperature limits, contains ice particles,
or is close to a chemical breakdown.
In the event of failure, call the service;
Please find contacts on page 1 or on our web site:
