User Manual
OBM
26
7.
SAFE USE AND
SAFETY ELEMENTS
It is not allowed to heat-up any material which could form explosive atmosphere.
Do not store any fluids on top of the housing!
Microprocessor controller has a special safety system which turns heaters off if temperature rises for
more than 5 °C above set temperature.
According to the large temperature range and possibilities of usage of different fluids, there is a
chance of fluid volume expansion at higher temperatures. Fill the bath with appropriate fluid. To avoid
unlikable leakage do not overfill the bath.
The operator should also make sure that the bath contains enough fluid at all times. The minimum
fluid level is when bottom openings on inner tank wall are flooded during the operation.
The appliance may only be used by trained personnel with enough practical experience regarding
heating
–
cooling and temperature controlled appliances.
Each user is responsible for correct and safe use.
When indicating and error, press "STOP" and switch the main switch in the OFF position immediately.
Contact the producer or service.
